HOME＞在庫検索＞在庫情報
ADP-2-10
Surface Mount Power Splitter/Combiner 2 Way-0° 50Ω 5 to 1000 MHz Maximum Ratings Operating Temperature Storage Temperature Features • low insertion loss, 0.4 dB typ. • excellent amplitude unbalance, 0.01 dB typ. • very good phase unbalance, 0.3 deg. typ. • aqueous washable • protected under U.S. Patent 6,133,525 -40°C to 85°C -55°C to 100°C Power Input (as a splitter) Internal Dissipation ADP-2-10+ 0.5W max. 0.125W max. Permanent damage may occur if any of these limits are exceeded. +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Pin Connections SUM PORT 1 PORT 1 • VHF/UHF receivers/transmitters • instrumentation e and Reel Available Tapra cost at no ext Devices/Reel 10, 20, 50, 100, 200, 500 500, 1000 Reel Size 7” 13” 3 PORT 2 4 Electrical Specifications GROUND 6 NOT USED CASE STYLE: CD636 FREQ. RANGE (MHz) 2,5 Outline Drawing ISOLATION (dB) L INSERTION LOSS (dB) ABOVE 3.0 dB M U L M PHASE UNBALANCE (Degrees) U L Typ. Min Typ. Min Typ. Min Typ. Max. Typ. Max. Typ. Max. 5-1000 25 15 23 15 20 15 0.3 M = 50-500 MHz 0.9 0.4 0.9 0.6 M U L M U Max. Max. Max. Max. Max. Max. 2.0 fL-fU L = 5-50 MHz AMPLITUDE UNBALANCE (dB) 2.0 3.0 0.2 0.2 0.3 1.2 U = 500-1000 MHz Typical Performance Data Frequency (MHz) D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .162 4.11 VSWR S VSWR 1 VSWR 2 S-2 F .055 1.40 G .100 2.54 wt grams 0.25 Demo Board MCL P/N: TB-48+ Suggested PCB Layout (PL-035) 3.22 3.23 3.23 3.23 3.23 3.23 3.26 3.26 3.28 3.28 0.01 0.00 0.00 0.00 0.00 22.55 25.33 26.82 26.58 26.00 0.06 0.03 0.02 0.06 0.14 1.04 1.24 1.03 1.19 1.03 1.16 1.03 1.16 1.04 1.16 1.24 1.19 1.16 1.16 1.16 3.32 3.33 3.36 3.36 3.41 3.41 3.49 3.48 3.56 3.54 0.01 0.01 0.00 0.00 0.02 24.51 22.61 21.19 20.24 19.64 0.21 0.39 0.57 0.66 0.76 1.07 1.11 1.14 1.16 1.18 1.16 1.16 1.16 1.15 1.14 1.16 1.15 1.14 1.12 1.10 650.00 750.00 850.00 950.00 1000.00 3.60 3.58 3.66 3.65 3.70 3.68 3.79 3.76 3.91 3.89 0.02 0.01 0.02 0.03 0.02 19.39 19.60 20.39 21.81 22.86 0.75 0.73 0.92 0.69 0.89 1.18 1.17 1.16 1.16 1.17 1.12 1.10 1.09 1.10 1.12 1.07 1.05 1.06 1.11 1.14 1. Total Loss = Insertion Loss + 3dB splitter loss. ADP-2-10+ TOTAL LOSS 4.4 S-1(dB) 4.2 ADP-2-10+ ISOLATION 35 S-2(dB) ISOLATION (dB) Outline Dimensions ( inch) mm C .220 5.59 Phase Unbalance (deg.) 5.00 10.00 25.00 50.00 80.00 TOTAL LOSS (dB) Suggested Layout, Tolerance to be within ±.002 � B .310 7.87 S-1 Isolation (dB) 150.00 250.00 350.00 450.00 550.00 PCB Land Pattern A .272 6.91 Amplitude Unbalance (dB) Total Loss1 (dB) 4.0 3.8 3.6 3.4 3.2 3.0 30 25 20 15 10 0 200 400 600 800 1000 FREQUENCY (MHz) 0 200 400 600 800 1000 FREQUENCY (MHz) ADP-2-10+ VSWR 1.5 #S-VSWR 1.4 #1-VSWR #2-VSWR electrical schematic VSWR 1.3 1.2 1.1 1.0 0 200 400 600 800 1000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. F M158496 ED-7799/2 ADP-2-10+ HY/TD/CP/AM 161024 Page 1 of 1
お買い上げ小計が１万円以上の場合は送料はサービスさせて頂きます。１万円未満の場合、また時間指定便はお客様負担となります。（送料は地域により異なります。）
