Transient Voltage Suppression Diodes
Surface Mount – 400W > P4SMA series
P4SMA Series
RoHS
Pb e3
Description
Uni-directional
The P4SMA series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Bi-directional
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10/1000µs Waveform
(Fig.2)(Note 1), (Note 2), (Note 5)
PPPM
400
W
Power Dissipation on Infinite Heat
Sink at TL=50OC
PD
3.3
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
60
A
VF
3.5/5.0
V
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional
Only (Note 4)
Operating Temperature Range
TJ
-65 to 150
°C
Storage Temperature Range
TSTG
-65 to 175
°C
Typical Thermal Resistance Junction
to Lead
RθJL
30
°C/W
Typical Thermal Resistance Junction
to Ambient
RθJA
120
°C/W
Notes:
1. Non-repetitive current pulse, per Fig.4 and derated above TJ (initial) =25ºC per Fig. 3.
2. Mounted on 5.0x5.0mm copper pad to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only.
4. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
5. The PPPM of stacked-die parts is 600W and please contact littelfuse for the detail
stacked-die parts.
®
Functional Diagram
• 400W peak pulse power
capability at 10/1000µs
waveform, repetition rate
(duty cycles):0.01%
• Excellent clamping
capability
• Low incremental surge
resistance
• Typical IR less than 1μA
when VBR min>12V
• or surface mounted
F
applications to optimize
board space
• ow profile package
L
• ypical failure mode is
T
short from over-specified
voltage or current
• hisker test is conducted
W
based on JEDEC
JESD201A per its table 4a
and 4c
• EC-61000-4-2 ESD
I
30kV(Air), 30kV (Contact)
• SD protection of data
E
lines in accordance with
IEC 61000-4-2
• FT protection of data
E
lines in accordance with
IEC 61000-4-4
• uilt-in strain relief
B
• Fast response time:
typically less than 1.0ps
from 0V to BV min
• igh temperature
H
to reflow soldering
guaranteed: 260°C/40sec
• VBR @ TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• Plastic package is
flammability rated V-0 per
Underwriters Laboratories
• eet MSL level1, per
M
J-STD-020, LF maximun
peak of 260°C
• Matte tin lead–free Plated
• Halogen-free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD609A.01)
Applications
TVS devices are ideal for the protection of I/O Interfaces,
VCC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic
applications.
Additional Infomarion
Bi-directional
Cathode
Datasheet
Resources
Samples
Anode
Uni-directional
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15
