True 75 Ohm BNC Straight Cabled Plug 3 Piece Solder or Crimp Captivated Contact
PART NUMBER
CABLE TYPE
CONTACT I.D.
BODY I.D.
FERRULE I.D.
CPMC-68-20
RG-179, 187
Belden 1520A
.016 (0.41)
.067 (1.70)
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
.128 (3.25)
1. Identify connector parts.
(3 piece parts)
2. Slide crimp sleeve over the cable as shown.
3. Strip cable per dimensions given and
loosen braid.
4. Place contact over cable center conductor
and position against insulation.
5. Crimp (.042 crimp hex) or solder contact.
If crimping the contact, crimp the contact
as close as possible to the cable insulation
as shown.
6. Push the cable with the attached contact
into the connector body until contact is captured by internal rib within connector body.
Contact location shall be per dimension
shown. Slide crimp sleeve over braid until
it rests against top of connector body. Finish assembly by crimping with appropriate
crimp hex die as indicated for each connector by the table.
Part
Number
CPMC-68-20
Cable Type
RG-179, 187, Belden 1520A
Crimp
Sleeve Hex
Contact
Crimp Hex
Recommended
Crimp Tool
.128 (3.25)
.042 (1.07)
24-9963P
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: 507-833-6287 • www.cambridgeproducts.com